Toll Free: (800) 836-0754
 
Phone: (585) 798-4300

Industrial Heaters & Heating > Mica Strip Heaters


Omega Heater - Mica Strip Heaters.
For hot plates, sealing equipment, hot stamping, dies and molds, etc. Thin and Light. Fast response to temperature & process control. Low cost.


Mica Strips with Post Terminals

P1R
Mica Strips with Post Terminals
Post terminals at each end of the heater with mounting slots. Available in 3/4" widths or wider.
P2R
Mica Strips with Post Terminals
Post terminals at same end of heater with mounting slots. Tandem along the length. Available in 1" widths or wider.

P3R
Mica Strips with Post Terminals
Post terminals at same end of heater with mounting slots. At right angel to length. Available in 2" widths or wider.

P4R
Mica Strips with Post Terminals
Post terminals at same and f heater with mounting slots. Terminals set off center along the length. Available in 1-1/2" widths or wider.




Mica Strips with Leads

P3R
Mica Strips with Post Terminals
Post terminals at same end of heater with mounting slots. At right angel to length. Available in 2" widths or wider.
P4R
Mica Strips with Post Terminals
Post terminals at same and f heater with mounting slots. Terminals set off center along the length. Available in 1-1/2" widths or wider.

L3BR
Mica Strips with Post Terminals
Metal braided flexible leads exiting heater from outside top surface with mounting slots. Available in 1" widths or wider. Option "B" shown - braid

L3AR
Mica Strips with Post Terminals
Flexible armor installed over fiberglass leadwire exiting heater from outside top surface with mounting slots. Available in 1" widths or wider Option "A" shown - armor.


Specifications

  • Length
    • Minimum without mounting holes 2-1/2"
    • Minimum with mounting holes 3-1/2"
    • Maximum consult Omega
  • Width
    • Minimum, Types P1R-L2CR 3/4"
    • Minimum, Type P3R 1-3/4"
    • Maximum consult Omega
  • Thickness
    • Nominal 3/16
  • Sheath Temperature
    • Maximum, Standard units 900 Deg. 482 Deg C
    • Maximum, Stainless Steel Sheath 1200 Deg. F 650 Deg. C
  • Wattage
    • 35 WATTS/sq. in. recommended max.
  • Terminals
    • 10-24 x 7/16 POST TERM. Or 12" FLEX. LEADS
  • Voltage
    • Maximum 480VAC












Mica Strip Heaters


"L" series (flexible leads)

"L" series (flexible leads)

  1. Top quality MICA insulation
  2. Nickel-chrome ribbon engineered for longest life at rated watts & volts
  3. Post terminals - riveted for positive electical connection to element
  4. 1/4 x 3/8 mounting hole
  5. Standard steel sheath with special surface treatment to increase heat transfer and to retard oxidation (stainless steel option.)


Options

  • A Flexible armor (BX) installed over flexible leads.
  • B Metal braid installed over flexible leads.
  • C Flexible leads - PTFE and fiberglass insulated nickel or nickel clad conductor
  • D Strain relief bracket
  • E Terminal Box
  • F Flexible Armor in Right Angle Bracket
  • G Thermocouple or Clearance Holes
  • H Button Terminals
  • I Appliance Pins
  • J Twist lock plug installed on leads
  • K Additional thickness, specify standard thickness is 3/16"
  • L Series with leads-specify option A, B or C
  • M Dual voltage, specify
  • N Stainless steel sheath, designed for higher sheath temperatures
  • O Grounding stud
  • P Series with post terminals
  • R Mounting slots 1/4" x 3/8", one at each end of strip
  • S Mounting slots 1/4" x 3/8" specify location
  • T No mounting slots

 


Contact Us - Site Map - Privacy Policy - Home
WebEssentials Website Design & Hosting