Toll Free: (800) 836-0754
 
Phone: (585) 798-4300

Sensors > Level


Lumenite Control Technology manufactures a wide variety of level control systems. These include, conductivity, capacitive and magetic float assemblies. All can be provided as Sanitary control systems.


Conductivity Controls

Series 201
Automatic filling: When liquid falls below the low level probe, load goes on. When liquid reaches the high level probe, load goes off.

Automatic emptying: When liquid reaches the high level probe, load goes on. When liquid falls below the low level probe, load goes off.
level sensor
Series 202
Alarm and signal light operation:
When liquid reaches the high level probe, alarm and light go on. When liquid falls below the low level probe, alarm goes on, but light remains off. When liquid is between the high and low level probes, both signals are off.level sensor
Series 205:
Two isolated, normally open load circuits, one circuit closed at each level:
When liquid reaches the low level probe, load 1 goes on. When liquid reaches the high level probe, load 2 goes on.level sensor



Single Level Industrial Probe Assemblies

Single Level Industrial Probe Assemblies

Single Level Industrial Probe Assemblies
Single Level Industrial Probe Assemblies


Single Level Industrial Probe Assemblies


Single Level Industrial Probe Assemblies




Two Level Sanitary Probes


Two Level Sanitary Probes Two Level Sanitary Probes

Two Level Sanitary Probes

Two Level Sanitary Probes




Capacity Level Transmitters
The MLST / MLXT 4220 controls are Lumenite®'s stand alone microprocessor based RF capacitance continuous monitoring level transmitters.  These push button calibrated sanitary and industrial units provide 4-20mA, 20-4mA and 0-5VDC analog outputs proportional to material level in any shaped tank.

The MLST / MLXT Temp 4220 is Lumenite®'s combination level / temperature transmitter for both sanitary and industrial applications.  In addition to having all of the features of the original design, the MLST/MLXT-Temp 4220 provides 2 separate 4-20mA outputs measuring level and temperature with one tankconnection.

Additional Technical Information for MLST/MLXT-Temp 4220 :>Temperature transmitter ranges from -100 to +1000°F or C>Provides 2 isolated 4-20mA analog outputs, one proportional to level, the second proportional to temperature> Output current error of 0.005%


MLST-4220 Sanitary Microprocessor Based Capacitance Level Transmitter
Sanitary Microprocessor




MLXT-4220 Industrial Microprocessor Based Capacitance Level Transmitter
Capacitance Level Transmitter



Many Styles Are Available. Contact us with your level control application!

Contact Us - Site Map - Privacy Policy - Home
WebEssentials Website Design & Hosting