Mica Strip Heaters – ANTECH SALES, INC.

Mica strip heaters from Omega Heater are perfect for hot plates, sealing equipment, hot stamping, dies and molds. Thin and light, with a fast response to temperature and process control, these low-cost heaters are available in several different widths and with multiple options for post terminals and leads.

Mica Strips with Post Terminals

Mica is thin, light, and low-cost!

P1R: Post terminals at each end of the heater, with mounting slots. Available in 3/4″ widths or wider.

P3R: Post terminals at same end of heater, with mounting slots, at right angle to length. Available in 2″ widths or wider.

P2R: Post terminals at same end of heater, with mounting slots tandem along the length. Available in 1″ widths or wider.

Post terminals at same end of heater, with mounting slots, set off-center along the length. Available in 1-1/2″ widths or wider.

Minimum length No mounting holes	2-1/2″
Minimum length With mounting holes	3-1/2″
Nominal thickness	3/16″
Max. sheath temp. Standard	900℉
Max. sheath temp. Stainless steel	1200 ℉
Maximum wattage	35W/in²
Maximum voltage	480VAC

Mica Strip with Leads

L1CR: Flexible fiberglass leads exiting heater from same end, with mounting slots. Available in 1″ widths or wider. Option “C” shown – leadwire.

L3BR: Metal braided flexible leads exiting heater from outside top surface, with mounting slots. Available in 1″ widths or wider. Option “B” shown – braid.

L2CR: Flexible fiberglass leads exiting heater from each end, with mounting slots. Available in 3/4″ widths or wider. Option “C” shown – leadwire.

L3AR: Flexible armor installed over fiberglass leadwire exiting heater from outside top surface, with mounting slots. Available in 1″ widths or wider. Option “A” shown – armor.

Options:

A Flexible armor over flexible leads
B Metal braid over flexible leads
C Flexible leads – PTFE and fiberglass insulated nickel or nickel clad conductor
D Strain relief bracket
E Terminal box
F Flexible armor in right angle bracket
G Thermocouple or clearance holes
H Button terminals
I Appliance pins
J Twist lock plug installed on leads
K Additional thickness, specify. Standard thickness is 3/16″
L Series with leads. Specify option A, B or C
M Dual voltage, specify
N Stainless steel sheath, for higher sheath temperatures
O Grounding stud
P Series with post terminals
R Mounting slots 1/4″ x 3/8″, one at each end of strip
S Mounting slots 1/4″ x 3/8″, specify location
T No mounting slots

CLICK HERE to contact us or place an order. Thank you for choosing Antech Sales!