Multi-Point Current Sensing
The CR4210 and CR4211 Series current transducers are self-powered. These transducers from CR Magnetics are calibrated to provide a 0-5 VDC and 0-10 VDC signal that is proportional to the average RMS input AC current. Designed for multi-point current sensing, these devices provide excellent features in a value package.
Applications:
• Multi-point current sensing and control panels
• Remote current sensing
• Monitor motor faults
• Monitor heating elements
• Monitor lighting elements
CLICK HERE to contact us or place an order. Thank you for choosing Antech Sales!
Current Sensing Relays
The CR4395 Series current sensing relay from CR Magnetics provides an effective and highly stable method for monitoring electrical current. The current-carrying wire is routed through the opening extending from the top of the case. When current reaches the level set by the trip point adjustment, the relay trips and starts the adjustable timer. After the timer cycles, the electromechanical relay is energized. A precision voltage reference circuit ensures a highly repeatable trip point.
Applications:
• Monitor electrical heater elements
• Sense motor over/under loads
• Detect lamp burnout
• Indicate phase loss
CLICK HERE to contact us or place an order. Thank you for choosing Antech Sales!
Voltage Transducers
The CRD4500 Series data stream digital transducers from CR Magnetics are designed for applications in which AC current waveforms are not purely sinusoidal. The digital technology is used to measure voltage, current, power frequency and energy in single and three phase designs. The data is streamed over an RS485 IEEE bus that enables multiple transducers to communicate through a single master connection. These advanced sensors are ideal for entire plant or zone monitoring.
Applications:
• Sub-metering
• Motor loads
• Uninterruptible power systems
• Remote monitoring
• Load shedding
• Energy management
CLICK HERE to contact us or place an order. Thank you for choosing Antech Sales!
Current Transducers
The CR5200 Series DC current transducers are designed to provide a DC signal that is proportional to a DC sensed current. These devices are designed by CR Magnetics for direct current only, targeting them toward general and daily applications. The 2-10 amp models utilize an advanced Magnetic Modulator technology, and the 20+ amp models utilize Hall Effect technology.
Applications:
• Battery chargers and systems
• DC motor drives
• Power supply management
• Mobile applications
CLICK HERE to contact us or place an order. Thank you for choosing Antech Sales!
Ground Fault Sensors
The CR7310 Series ground fault sensor from CR Magnetics provides a reliable and cost-effective method for sensing ground faults. The current-carrying wires are routed through the opening extending from the top of the case. When ground current reaches the level set by the trip point adjustment, the relay trips, illuminates the tripped LED, and provides an output signal. A precision voltage reference circuit ensures a highly repeatable trip point. The sensor is rated as a Class 1 device.
Applications:
• Monitor electrical heater elements
• Sense motor over/under loads
• Detect lamp burnout
• Indicate phase loss
CLICK HERE to contact us or place an order. Thank you for choosing Antech Sales!
Current Transformers
The CR Magnetics line of instrumentation grade electrical current transformers are available in either Commercial or ANSI Metering class. The Commercial Class transformers are lower cost, and are well suited for current monitoring applications. The ANSI Metering Class transformers are higher cost units intended for power monitoring applications in which high accuracy and minimum phase angle error are required.
Twelve different window openings and eight different mounting styles, along with numerous secondary ratios, are available to meet most applications. Custom sizes are available to suit unique electrical requirements.
CLICK HERE to contact us or place an order. Thank you for choosing Antech Sales!